Stainless steel ball Valve

The stainless steel ball valve is the most widely specified isolation valve in the world and for good reason. A quarter-turn operation, zero pressure drop in the open position, bubble-tight shutoff, and a body that resists corrosion from water to seawater to dilute acids makes the ss ball valve the default choice across oil and gas, chemical, pharmaceutical, food, marine, and water treatment industries. At Kalpataru Piping Solution, we manufacture and supply the complete range: 2-piece, 3-piece, 3-way stainless steel ball valve, CF8M ball valve, socket weld ball valve, flanged SS ball valve, stainless steel mini ball valve, and high-pressure stainless steel ball valve rated to 6000 PSIG — in grades SS 304, 304L, 316, 316L, 316Ti, 317L, 321, 347H, and 904L, to ASTM A351 CF8M and ASTM A182 F304/F316 material standards. Every valve ships with an EN 10204 3.1 mill test certificate and is 100% leak-tested before dispatch. Tell us your grade, size, pressure class, port, and end connection — we respond within 24 hours.

What is a Stainless Steel Ball Valve?

A stainless steel ball valve is a quarter-turn, rotary-motion flow control device that uses a hollow, perforated, and pivoting ball to control the flow of a liquid or gas. When the ball’s bore is aligned with the pipe, the valve is fully open and fluid passes through with minimal resistance. When the handle is rotated 90°, the solid part of the ball blocks the bore and flow stops completely. The ball’s position at open and closed is visually obvious from the handle direction — a key safety advantage over gate and globe valves.

How Ball Valves Work

  • Open position: Bore in the ball aligns with the pipe — fluid flows through unrestricted
  • Closed position: Ball rotated 90° — solid face of ball seals against both seats — zero leakage
  • Quarter-turn: Only 90° of handle rotation moves from fully open to fully closed — the fastest of all manual valve types
  • Bi-directional: SS ball valves seal against flow from either direction — no dedicated inlet or outlet

Materials Grades of Stainless Steel Ball Valve 

Full Port vs Reduced Port

Feature

Full Port (Full Bore)

Reduced Port (Standard Bore)

Bore Size

Same diameter as pipe ID

Smaller than pipe ID (one pipe size down)

Pressure Drop

Near zero

Slight pressure drop

Flow Coefficient (Cv)

Higher

Lower

Pigging Compatibility

Yes

No

Body Size

Larger

More compact

Cost

Higher

Lower

Best For

Process lines, pigging, slurries

General utility, low-flow service

CF8 and CF8M — The Cast Equivalents

On engineering drawings, stainless steel ball valve bodies are often specified by their cast grade rather than their wrought grade:

  • CF8 = Cast equivalent of SS 304 (18-8 stainless; C max 0.08%)
  • CF3 = Cast equivalent of SS 304L (low-carbon 18-8; C max 0.03%)
  • CF8M = Cast equivalent of SS 316 (18-8 + 2–3% Mo; CF8M 1000WOG)
  • CF3M = Cast equivalent of SS 316L (low-carbon + Mo)

When a datasheet calls for a CF8M ball valve, it is specifying a cast SS 316-equivalent body — exactly the grade we supply in our SS 316 instrumentation ball valve range.

Complete Ball Valve Type Matrix

Type

Body Pieces

Size Range

Pressure Class

End Connection

Best For

1-Piece

1

¼” – 2″

150# – 600#

Threaded (NPT/BSP)

Low-cost utility

2-Piece

2

¼” – 4″

150# – 600#

Threaded, SW, Flanged

General process, water

3-Piece

3

¼” – 6″

150# – 600#

Threaded, SW, BW, Flanged

Chemical, food, pharma

3-Way (L/T port)

2–3

¼” – 4″

150# – 600#

Threaded, SW, Flanged

Divert / mix service

4-Way

3

¼” – 2″

150# – 300#

Threaded

Analytical, sampling

Socket Weld

2–3

½” – 4″

800# – 2500#

Socket Weld (SW)

High-pressure small bore

Flanged

2

2″ – 12″

150# – 600#

Flanged (RF, RTJ)

Large bore process lines

Instrumentation HP

Forged

⅛” – 2″

Up to 6000 PSIG

NPT, SW, Tube Ferrule

Gauge, analyser, sample

Mini

1–2

⅛” – ½”

Up to 6000 PSIG

NPT, Tube Ferrule

Lab, instrument

CF8M 1000WOG

Cast

½” – 12″

150# – 600#

Threaded, Flanged

Chemical, marine process

Spring-Return

2–3

½” – 4″

150# – 600#

Threaded, SW, Flanged

Safety, fire-safe

Electric Actuated

2–3

½” – 6″

150# – 600#

Threaded, SW, Flanged

Automated / remote

Which Grade for Which Service?

Environment

Minimum Grade

Better Choice

Why

Fresh water, mild chemicals

SS 304 (CF8)

SS 316 (CF8M)

304 works; 316 adds safety margin

Seawater, marine service

SS 316L (CF3M)

SS 904L

Chloride pitting resistance from Mo

Chlorinated chemicals, bleach

SS 316L

SS 317L or 904L

Higher Mo % resists aggressive chlorides

HF acid handling

Monel 400

—

SS grades not suitable

Food, dairy, pharma

SS 316L (electropolished)

SS 316L (sanitary)

Low C prevents sensitisation after cleaning cycles

High-temperature steam

SS 321 or 347H

—

Ti/Nb stabilisation prevents sensitisation at temp

Strong sulphuric acid

SS 904L

Alloy 20

High Ni + Mo for acid service

Cryogenic (LNG)

SS 304L or 316L

—

Austenitic grades remain tough at –196°C

SS Ball Valve Specification – ASTM A351 CF8M & ASTM A182 F304/F316

Parameter

Details

Material Standard

ASTM A351 CF8M (cast) / ASTM A182 F304, F316, F316L (forged)

Design Standard

ASME B16.34, API 6D, BS 1868

Face-to-Face Dimension

ASME B16.10

Flange Dimensions

ASME B16.5

Pressure & Temperature

ASME B16.34

Test & Inspection

API 6D, API 598

Visual Inspection

MSS SP-55

Marking

MSS SP-25

Leak Tightness

Class VI (soft-seated)

Approvals

MSS SP-110, API 598, ANSI B1.20.1, API 594, ANSI B16.11, NACE, ANSI B16.34, API 607 Fire-Safe

Media

Oil, Gas, Water, Steam, Chemicals, Seawater, Food

Temperature of Media

–54°C to +232°C (PTFE seat) / –54°C to +260°C (Grafoil seat)

Max Working Pressure

103.4 barg (1500 PSIG) to 414 barg (6000 PSIG) for high-pressure types

Operation

Manual (lever / gearbox), Electric actuator, Pneumatic actuator

Leakage Rate

Soft Seat: Zero leakage (Class VI) / Hard Seat: ≤ Rated Flow 10⁻⁵

Seal Ring Material

PTFE, PPL, Soft Graphite, PEEK, RPTFE

Manufacturing Process

Forged bar stock / Investment casting

Size Range (Instrumentation)

⅛” to 4″ (DN6 to DN100)

Size Range (Process / Flanged)

2″ to 12″ (DN50 to DN300)

Pressure Class

150#, 300#, 600#, 800#, 1500#, 2500# / PN10, PN16, PN40

Connection Types

Single ferrule, Double ferrule, Thread (NPT/BSP), BSPP, Flanged (4-bolt, C.61/C.62), ISO 6149, SAE

Functions

2-Way, 3-Way, 4-Way, 5-Way, Diverter, NC, NO

Flow Cv (Cv range)

0.93 to 87 (depending on size and port)

Standard

3A, ISO, DIN, SMS, ASTM, JIS

OEM Service

Available

Pressure Rating — ASTM A182 F304/316 Ball Valve (PSIG by NPS)

NPS

Working Pressure (PSIG)

½” – 1½”

1000 PSIG (69 BARG)

2″

800 PSIG (55 BARG)

3″

600 PSIG (41 BARG)

4″ – 5″

500 PSIG (34 BARG)

6″

300 PSIG (21 BARG)

Pressure rating for full-port, floating ball, PTFE-seated SS 316 (F316) per ASTM A182. Trunnion-mounted or higher-pressure-class valves have different ratings.

Chemical Composition of SS Ball Valve Grades

Wrought Grades — Forged Ball Valve Bodies (ASTM A182)

Type

C (Max)

Si (Max)

Mn (Max)

P (Max)

S (Max)

Cr

Ni

Mo

N (Max)

304L

0.030

0.75

2.00

0.045

0.030

18.00–20.00

8.00–10.50

—

0.100

304

0.080

0.75

2.00

0.045

0.030

18.00–20.00

8.00–11.00

—

0.100

316

0.080

1.00

2.00

0.045

0.030

16.00–18.00

10.00–14.00

2.00–3.00

—

316L

0.030

1.00

2.00

0.045

0.030

16.00–18.00

10.00–14.00

2.00–3.00

0.100

Cast Grades — Cast Ball Valve Bodies (ASTM A351)

Cast Grade

Wrought Equivalent

C (Max)

Cr

Ni

Mo

CF8

SS 304

0.08

18–21

8–11

—

CF3

SS 304L

0.03

17–21

8–12

—

CF8M

SS 316

0.08

18–21

9–12

2–3

CF3M

SS 316L

0.03

17–21

9–13

2–3

CF8M with 2–3% Mo is what gives the CF8M ball valve its superior resistance to pitting and crevice corrosion compared to the CF8 (SS 304 equivalent).

Mechanical Properties of SS Ball Valve Grades

Mechanical Properties — DN500 / Industrial Ball Valve (ASTM A182)

Grade

Yield Strength Min (MPa)

Tensile Strength Min (MPa)

Elongation Min (%)

Reduction of Area Min (%)

Hardness Max (HB)

Hardness Max (HRB)

304L

170

458

30

50

201

92

304

205

515

30

50

201

92

316L

170

485

30

50

217

95

316

205

515

30

50

217

95

Actual values reported on EN 10204 3.1 mill test certificate per heat.

Physical Properties of Key Ball Valve Grades

Property

SS 304

SS 304L

SS 316

SS 316L

Density (g/cm³)

7.93

7.93

7.98

7.98

Melting Point (°C)

1400–1455

1400–1455

1370–1400

1370–1400

Thermal Conductivity (W/m·K)

16.2

16.2

16.3

16.3

Thermal Expansion Coeff (×10⁻⁶/°C)

17.2

17.2

16.0

16.0

Magnetic Permeability

Non-magnetic

Non-magnetic

Non-magnetic

Non-magnetic

Max Temp (Continuous Service)

870°C

870°C

870°C

870°C

Types of Stainless Steel Ball Valves – Complete Range

1-Piece SS Ball Valve

A single solid body — economical and compact but not field-repairable. The ball and seats are permanently enclosed. Preferred where cost is the primary driver and the valve body does not need to be opened for cleaning or seat replacement. Available in reduced port configuration in SS 304 and SS 316.

2-Piece Stainless Steel Ball Valve

The most widely used SS ball valve configuration. The body splits into two sections at one joint, allowing the valve to be disassembled for cleaning or seat replacement without removing it from the line. The ½” stainless steel ball valve, 1″ stainless steel ball valve, 2″ stainless steel ball valve, and 2-piece ball valve in sizes ¼” to 4″ are the standard for water, utility, and general process service. Available in full-port and reduced-port variants in SS 304 and SS 316L.

3-Piece Stainless Steel Ball Valve

The 3 piece ball valve (also called three piece ball valve) splits into three body sections — a centre body and two end caps. The end caps can be unbolted and slid down the pipe to remove the centre body for maintenance without disturbing the pipe joints. The standard for process, chemical, and food/pharma service where field maintenance and seat replacement are routine. Available in SS 304, SS 316, and SS 316L in full-port and reduced-port configurations from ¼” to 6″.

3-Way Stainless Steel Ball Valve

The 3-way stainless steel ball valve (also called stainless steel 3-way valve) has three ports and is used to divert or mix flow. The ball port configuration determines its function:

  • L-port: Connects any two adjacent ports — used for diverting flow between two outlets
  • T-port: Connects all three ports simultaneously — used for mixing or splitting flow

Available in SS 304, SS 316L; NPT, BSP, socket weld, and flanged ends; sizes ¼” to 4″.

4-Way Stainless Steel Ball Valve

Four-port ball valve for complex flow diversion, mixing, or selecting between two independent process streams. Commonly used in chromatography, sampling, and analytical instrument connections.

Socket Weld SS Ball Valve

The socket weld ball valve uses a socket end connection where the pipe is inserted into a recessed socket and fillet-welded from the outside. Preferred in high-pressure small-bore piping (Class 800# to 2500#) where threaded connections are not acceptable for the service. Available in SS 304 and SS 316L per ASME B16.11 in ½” to 4″.

Flanged SS Ball Valve

The flanged stainless steel ball valve uses a bolted flange connection per ASME B16.5. Standard for large-bore (2″ to 12″) and higher-pressure-class (Class 150# to 600#) process piping where the valve must be removed from the line without disturbing the pipe. Cast CF8M or CF8 body per ASTM A351.

SS Ball Valve with Threaded End (NPT / BSP / BSPT)

For small-bore piping up to 4″ where welded connections are not required. Male and female NPT, BSP, and BSPT threads available. Most common in utility services, instrumentation headers, and equipment connections.

SS Instrumentation Ball Valve (High-Pressure)

The stainless steel ball valve for instrumentation service is rated to 1000, 3000, or 6000 PSI working pressure. Used in pressure gauge connections, sample points, and analyser impulse lines. Body: forged SS 316 (ASTM A182 F316); end connections: NPT female or male, dual-ferrule tube (Swagelok compatible), socket weld.

Grade-specific instrumentation ball valve pages: SS 304 | SS 304L | SS 316 | SS 316L | SS 316Ti | SS 317L | SS 321 | SS 347H | SS 904L

Stainless Steel Mini Ball Valve

The stainless steel mini ball valve is a compact, lightweight valve typically in sizes ⅛” to ½” with a reduced-height body. Used in laboratory, analytical, and instrumentation applications where space is limited. Available in SS 304 and SS 316L with NPT or dual-ferrule tube ends.

CF8M Ball Valve (Cast SS 316)

The CF8M ball valve is a cast SS 316-equivalent body valve rated to CF8M 1000WOG (1000 psi Water, Oil, Gas) in the standard configuration. Used for process isolation in chemical, petrochemical, and marine service where the cast body’s chloride resistance (from molybdenum) is required. Body: ASTM A351 CF8M.

Spring-Return (Fail-Safe) Ball Valve

The spring return ball valve stainless steel uses a spring-loaded handle or actuator that returns the valve to its default position (open or closed) on loss of power or pneumatic signal. Used in emergency shutoff, safety interlocks, and fire-safe service. SS 316L body, API 607 fire-safe rated.

Stainless Steel Electric Ball Valve

The stainless steel electric ball valve pairs a quarter-turn electric actuator (24V DC, 110V AC, or 230V AC) with an SS ball valve for remote or automated operation. Available in 2-way and 3-way configurations, with or without position feedback and manual override.

Industrial Applications of Stainless Steel Ball Valves

Industry

Recommended Grade

Ball Valve Type

Specific Application

Oil & Gas

SS 316L (CF3M)

Flanged full-port, socket weld HP

Wellhead isolation, gas distribution, instrument connections

Chemical Processing

SS 316L, SS 317L

3-piece, CF8M, flanged

Acid, solvent, chlorinated compound isolation

Marine & Offshore

SS 316L (CF3M)

Flanged, socket weld

Seawater cooling, ballast, firewater systems

Pharmaceutical / Biotech

SS 316L (electropolished)

Sanitary 3-piece, tri-clamp

Sterile process isolation, CIP/SIP systems

Food & Beverage

SS 304, SS 316L

Sanitary 3-piece, tri-clamp

Dairy, brewing, beverage process lines

Water & Wastewater

SS 304, SS 316

2-piece flanged, butterfly

Potable water, cooling water, treated effluent

Power Generation

SS 321, SS 347H

Socket weld HP, flanged

Steam, feedwater, high-temperature service

LNG / Cryogenic

SS 304L, SS 316L

Extended-stem flanged

Liquid natural gas, liquid nitrogen isolation

Semiconductor

SS 316L (electropolished)

Mini ball valve, instrumentation

Ultra-pure gas and chemical distribution

HVAC

SS 304

2-piece threaded, flanged

Chilled water, heating circuits, fan coil isolation

Dairy & Cosmetics

SS 316L

Sanitary tri-clamp 3-piece

Hygienic CIP/SIP-compatible process lines

Pulp & Paper

SS 317L

Flanged full-port

Bleaching liquors, washing, black liquor

Suitable Media for SS Ball Valves

Stainless steel ball valves handle:

  • Gases: Natural gas, LPG, nitrogen, air, steam, hydrogen, oxygen, inert gases
  • Liquids: Water (potable, industrial, seawater), oil, fuel, solvents, alcohols, dilute acids
  • Slurries: In full-port configuration with appropriate seat material
  • Food-grade media: Milk, juice, beer, edible oils, sugar syrup (SS 316L sanitary)
  • Sewage and wastewater: Full-bore flanged type

Suitable media per competitor specification includes: Water, Sewage, Seawater, Gas, Food, and Oils.

Stainless Steel Ball Valve Dimension Charts

Class 150LB SS Ball Valve Main Dimensions (mm) — ASME B16.34

NPS

L (mm)

LB (mm)

Bore ød (mm)

øD (mm)

H (mm)

W (mm)

RF (mm)

Weight RF (kg)

Weight BW (kg)

½”

108

140

13

90

55

130

60.3

2.3

1.8

¾”

117

152

19

100

55

130

69.9

3.0

2.8

1″

127

165

25

110

70

160

79.4

4.5

3.7

1½”

165

190

38

125

90

200

98.4

7.0

6.5

2″

178

216

49

150

105

350

120.7

9.5

8.5

2½”

190

241

62

180

155

400

139.7

15

14

3″

203

283

74

190

165

500

152.4

19

21

4″

229

305

100

230

205

500

190.5

33

35

6″

394

457

150

280

255

600

241.3

93

98

8″

457

521

201

345

280

800

298.5

160

170

10″

533

559

252

405

345

800

362.0

200

225

12″

610

635

303

485

420

800

431.8

280

295

Dimensions per ASME B16.9/B16.34. L = face-to-face; LB = end-to-end; ød = bore; øD = flange OD; H = height; W = handwheel diameter; RF = raised face diameter. Weights are approximate.

Class 300LB SS Ball Valve Main Dimensions (mm) — ANSI 300LB

NPS

L (mm)

LB (mm)

Bore ød (mm)

øD (mm)

H (mm)

W (mm)

Weight RF (kg)

Weight BW (kg)

½”

140

140

13

95

55

130

2.5

1.8

¾”

152

152

19

115

55

130

3.5

2.0

1″

165

165

25

125

70

160

5.5

3.2

1½”

190

190

38

155

90

200

10.5

5.5

2″

216

216

49

165

105

350

14.5

8.7

2½”

241

241

62

190

153

400

23.5

15

3″

283

283

74

210

165

500

30

18

4″

305

305

100

255

205

500

55

36

6″

403

457

150

320

255

600

118

85

8″

502

521

201

380

280

800

200

152

10″

508

559

252

445

345

800

250

105

12″

648

635

303

520

420

800

330

232

Class 600LB SS Ball Valve Main Dimensions (mm) — ASME B16.34

NPS

L/LB (mm)

Bore ød (mm)

øD (mm)

H (mm)

W (mm)

Weight RF (kg)

Weight BW (kg)

½”

165

13

95

62

130

3.3

2.6

¾”

190

19

115

62

160

4.5

3.1

1″

216

25

125

78

200

7.2

4.8

1½”

241

38

155

100

350

13.5

8.0

2″

292

49

165

120

400

19

13

2½”

330

62

190

175

500

31

22

3″

356

74

210

212

600

39

27

4″

432

100

275

235

600

71

53

6″

559

150

322

290

800

153

120

All dimensions are reference values. Actual dimensions may vary by manufacturer, schedule, and special design. Contact Kalpataru for certified dimensional drawings.

Stainless Steel Ball Valve Pressure Ratings

Pressure-Temperature Rating — SS Ball Valve per ASME B16.34 (SS 316L)

Pressure Class

Max Pressure at 20°C

Max Pressure at 100°C

Max Pressure at 200°C

Max Pressure at 300°C

Class 150#

19.6 bar (285 psi)

17.7 bar

15.8 bar

13.8 bar

Class 300#

51.1 bar (740 psi)

46.6 bar

41.4 bar

36.6 bar

Class 600#

102.1 bar (1480 psi)

93.2 bar

82.7 bar

73.3 bar

Class 900#

153.2 bar (2220 psi)

139.9 bar

124.1 bar

110.0 bar

Class 1500#

255.3 bar (3705 psi)

233.1 bar

206.8 bar

183.3 bar

Class 2500#

425.5 bar (6170 psi)

388.4 bar

344.7 bar

305.4 bar

Actual P-T rating depends on material grade and temperature. Always verify against ASME B16.34 Appendix A for the specific alloy group.

High-Pressure SS Ball Valve Rating (Instrumentation Type)

Valve Type

NPS / Tube OD

Working Pressure (PSIG)

Body Material

Standard Process

½” – 1½”

1000 PSIG

ASTM A351 CF8M

High-Pressure Standard

½” – 2″

2000 PSIG

ASTM A182 F316

Instrumentation

⅛” – 1″

3000 PSIG

ASTM A182 F316

High-Pressure Instrumentation

⅛” – ½”

6000 PSIG

ASTM A182 F316

6000 PSIG stainless steel ball valves are forged from A182 F316 bar stock and are the standard for high-pressure instrument and sample connections in oil and gas, chemical, and nuclear service.

Quality Testing & Certifications

Every stainless steel ball valve we supply is 100% individually tested before dispatch. Batch-testing does not detect individual valve defects — we test every valve.

Test

Standard

What Is Verified

Chemical Analysis

ASTM A751 / OES

Grade identity — Cr, Ni, Mo, C confirmed per heat

Tensile & Yield Testing

ASTM A370

Mechanical property compliance per ASTM A182 / A351

Hardness Testing

ASTM E18 / E10

Grade and heat treatment confirmation

Hydrostatic Shell Test

API 598 / API 6D

Body and bonnet seal at 1.5× rated pressure — 100% of valves

Seat Leakage Test

API 598 Class VI

Zero leakage on soft-seated SS ball valves — 100% of valves

High-Pressure Shell Test

API 6D / ASME B16.34

For high-pressure (>600#) and HP instrumentation valves

Fire-Safe Test

API 607

Body seal integrity after fire exposure (for fire-safe rated valves)

Anti-Static Test

API 608 / MSS SP-110

Electrical continuity stem-to-ball-to-body — prevents static spark

PMI (Positive Material ID)

XRF Gun

Grade confirmed at final inspection — prevents alloy substitution

Dimensional Inspection

ASME B16.34 / B16.10

Face-to-face, bore, port, flange, end connections

Visual Inspection

MSS SP-55

Surface defects, finish, marking

Certifications & Approvals

  • ASME B16.34 — Valve Pressure-Temperature rating standard
  • API 6D — Pipeline ball valve design and testing
  • API 598 — Valve inspection and testing (shell and seat leakage)
  • API 607 — Fire-safe testing (available on request)
  • MSS SP-110 — Ball valve design and pressure testing
  • NACE MR0175 — Sour service (H₂S) material compliance
  • EN 10204 Type 3.1 — Mill test certificate (every heat)
  • EN 10204 Type 3.2 — Available with client-nominated TPI
  • ISO 9001:2015 — Quality management compliance

Third-party inspection by Lloyd’s Register, Bureau Veritas, TÜV India, SGS, or any client-nominated agency is co-ordinated as standard.

Stainless Steel Ball Valve Price List

The stainless steel ball valve price in India generally ranges from ₹700 to ₹20,000 per piece, depending on the valve size, SS304 or SS316 grade, pressure rating, connection type, bore design, and construction. Small 1/2-inch SS ball valves are typically more economical, while larger 3-inch and 4-inch industrial ball valves are priced higher. For an accurate stainless steel ball valve price list, customers should contact the supplier with their required size, material grade, pressure class, and quantity. 

Request a Quote Now!

Frequently Asked Questions – Stainless Steel Ball Valves

A stainless steel ball valve is a quarter-turn rotary-motion valve that uses a hollow ball to control fluid flow. When the ball's bore aligns with the pipe, the valve is fully open. Rotating the handle 90° turns the solid part of the ball across the bore, stopping flow completely. SS ball valves provide bubble-tight shutoff, minimal pressure drop, and fast on/off operation — making them the standard for process isolation.

Kalpataru Piping Solution supplies stainless steel ball valves from ⅛" NB (3mm) up to 12" NB (300mm) for process and flanged types. Instrumentation ball valves are available in ⅛" to 4" in NPT, BSP, dual-ferrule tube, and socket weld end connections. Size availability varies by pressure class and type.

The working pressure of a stainless steel ball valve depends on its size and pressure class. Standard SS 316 flanged ball valves are rated to 1000 PSIG at ½"–1½" NB, decreasing with size. High-pressure instrumentation SS ball valves can be rated up to 6000 PSIG in forged ASTM A182 F316 bodies. Always check against the ASME B16.34 P-T rating table for the specific grade and temperature.

A 3-way stainless steel ball valve has three ports and is used to divert or mix flow. An L-port configuration connects any two adjacent ports (diverting), while a T-port connects all three simultaneously (mixing or splitting). Common applications include selecting between two process streams, blending two fluids, or directing output to either of two destinations.

Fire-safe stainless steel ball valves are available — they are designed and tested per API 607 to maintain body sealing integrity after exposure to fire even if the soft PTFE seat is destroyed. Fire-safe SS ball valves use a secondary metal-to-metal seat that engages when the PTFE seat fails. Available on request from Kalpataru in SS 316L body with API 607 certification.

Need Stainless Steel Ball Valves with 100% Leak Test & Full MTC Documentation?

Send us your grade (SS 304, 316, CF8M), type (2-piece, 3-piece, 3-way), size, pressure class, and end connection. We respond with a confirmed price within 24 hours — every valve ships with API 598 test record and EN 10204 3.1 MTC.

Approved Supplier to EIL, TÜV India, Lloyd's Register, Tata Engineering & Aramco Projects