347 Stainless Steel One-Piece Instrumentation Ball Valve, Stainless Steel 347 Ball Valves, SS 347 3-Way Ball Valves, Stainless Steel 347 Two Way Ball Valves Exporter, UNS S34700 Instrumentation Ball Valve, Stainless Steel 347 High Pressure Ball Valve, SS 347 Instrumentation Ball Valves Supplier in Mumbai, India.
Kalpataru Piping is a renowned seller and manufacturer of SS 347 Instrumentation Ball Valves, which is ferritic, stainless chromium and heat resisting steel. Sigma phase embrittlement here in Stainless Steel 347 Instrumentation Mini Ball Valves happens upon elongated time of exposure in the temperature range of 1000 Deg F to 1300 Deg F. Our Stainless Steel 347 Instrumentation Round Body Ball Valves has a soaring impact of ductile-to-brittle changeover temperature. Therefore, unbeaten bending and forming in Stainless Steel 347 Instrumentation Square Ball Valves is helped by low forming speeds, perimeter grounding and preheating to 250 Deg F to 400 Deg F. Meanwhile, annealing of this Stainless Steel 347 Instrumentation High Pressure Ball Valves when needed must be carried out at 1550 Deg F to 1650 Deg F, which is further followed by quick cool.
SS 347 Panel Ball Valve, Stainless Steel 347 Lined Ball Valves Dealer, SS 347 Rising Stem Ball Valve, AISI 347 Flanged Ball Valves, SUS 347 Four-way Ball Valves, Grade 347 SS Multiport Ball Valves, DIN 1.4550 Instrumentation Ball Valve Distributor, Stainless Steel 347 Trunnion Ball Valves Stockist, Stainless Steel 347 Instrumentation Ball Valves Exporter in India.
Stainless Steel 347 Instrumentation Ball Valves Specification
|Pressure Rating||150#, 300#, 600#, 800#, 900#, 1500#, 2500#|
|Size||6mm to 750mm|
|Thread||NPT, BSP, BSPT, UNEF, etc.|
|Ball Valve Type||One Piece, Two Piece, Three Piece, 3 Way, 4 Way, High temperature, fire safe, trunnion mounted Full Bore, Metal Seated, separate ball and shaft, split body design, pneumatically operated ball valve with Manual Over ride and gas purging provision.|
|End Connection||Flanged End / Screwed End / Butt Weld End / Screwed to BSPT / NPT / Socket Weld / Buttweld with extended Nipple|
|Design Standards||Valve Body – ASME B 16.34
Valve Flanges – ASME 16.5
Face to Face – ASME B 16.10 (long pattern)
SS 347 Instrumentation Ball Valves Equivalent Standard Grade
Stainless Steel 347 Instrumentation Ball Valves Types
Stainless Steel 347 Instrumentation Ball Valves Chemical Composition
|SS 347||0.08 max||2.0 max||1.0 max||0.045 max||0.030 max||17.00 – 20.00||–||9.00 – 13.00||62.74 min|
Grade 347 Stainless Steel Ball Valves Mechanical Properties
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.0 g/cm3||1454 °C (2650 °F)||Psi – 75000 , MPa – 515||Psi – 30000 , MPa – 205||35 %|