316 Stainless Steel Union Tee, UNS S31600 Single Ferrule Fittings, SS 316 Female Branch Tee, DIN 1.4401 / 1.4436 45 Degree Male Elbow, ASTM A182 SS 316 Instrumentation Tube Fittings Exporter, Stainless Steel 316 Compression Tube Fittings Supplier in Mumbai, India.

Kalpataru Piping is a well-known supplier of SS 316 Instrumentation Tube Fittings, which will be used to form joints, tees, and junctions and will now have bolt holes all around the outer boundaries. Stainless Steel 316 Front Ferrule Fittings may have a ring/boss or a focal point, and can be made with a bore to fit either pipe or tube. These Stainless Steel 316 Back Ferrule Fittings are frequently employed because of their most major benefit, which is that they may be utilised in unanticipated scenarios and in highly variable environments where welding is dangerous. Meanwhile, clients can get Stainless Steel 316 Tube End Closure in a variety of sizes, specifications, grades, and thicknesses to meet their needs.

SS 316 Front & Back Ferrule , Gr. 316 Hydraulic Tube Fittings Exporter, SUS 316 Ferrule Fittings, Grade 316 SS Double Ferrule Tube Fittings, Grade 316 Union Cross Distributor, AISI 316 Bulkhead Union Dealer, ASME SA182 316 Male Run Tee Stockist in India.

Reducing 316 Stainless Steel Union Fittings and Stainless Steel 316Ti Tube Fittings are most typically used in fuel and water pipelines, where they are joined by a gasket in the centre. Meanwhile, there are various advantages to using Stainless Steel UNS S31600 Bulkhead Elbow, including its lack of flaws and long service life. Additionally, when compared to forged or cast goods, Alloy 316 Male Connector has finer grain establishment, lower maintenance costs, and so on. Type 316 Female Connectors are available in a broad range of sizes and are widely utilised at all pressures.

Testings (Destructive, Non Destructive):

  • Positive Material Identification - PMI Testing
  • Hydrostatic Test
  • Chemical Analysis - Spectro Analysis
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Mechanical Testing Such as Tensile, Elongation
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Micro Test
  • Radiography Test
  • Flattening Test
  • Macro Test
  • Dye Penetrant Test (DP Test)
  • Stainless Steel 304 Hex Bushing
  • Hardness Test
  • Ultra Sonic Test (UT)
  • Pitting Resistance Test
  • Eddy Current Testing
  • Intergranular Corrosion (IGC) Test
  • Impact Test
  • Bend Test
  • Flaring Test
  • We understand the  Quality of packaging  specially in case of Domestic & international  shipments as the consignment has to go through a number of channels to reach the final destination, therefore we take proper care of Quality.
  • We packing our Material in a various ways depending on the products. The different ways in which our products are packed are:
    • Wooden Boxes
    • Shrink-wrapped
    • Carton boxes
    • Wooden Crates
    • Wooden Pallets
  • All our Material will come with complete marking details which are co-related to the test certificates we supply.
  • In case of orders for cut piece of Fittings, Elbow or Reducer, the marking is transferred from the product from which is cut. In such cases we provide Letter confirming the marking transfer and picture of the product from which it is cut.
Delivery Time:
  • If the Product are available in stock, we take 3 days from the date of receipt of  payment to clear the shipment and send it to port.
  • And in-case the Product are not in stock, the time taken for manufacturing depends on the size, quantity and grade.
  • Still we can claim the fact that we can contend with anyone in India on Delivery time and almost of the time our product time is the least.
  • We have Contract with Reputed logistic partners in India which can undertake any type of shipping activites and make sure that there is no delay in shipment.
  • We welcome stage wise inspection, final stage inspection from any of your representative or third party inspection agencies.
  • We regularly have inspections ongoing at our Factory from internationally acclaimed Inspection Agencies such as TUV, Llyods, BVIS, SGS, DNV etc.
  • Furnaces (piping, doors, burners, fans and recuperators)
  • Thermal Process Plants for annealing covers and boxes, burner grids,
    doors, fans, muffles and retorts, recuperators, walking beams
  • Industries processing food
  • Sintering/Cement Plants – burner shields, burners, wind boxes feeding and discharging systems
  • Petroleum and Petrochemical refineries for catalytic recovery systems, flares, recuperators, tube hangers
  • Bed Furnaces (Fluidized) suc as grids, wind boxes, piping, coal combustors
  • Components (Cryogenic)

Stainless Steel 316 Instrumentation Fittings Specification

SpecificationsASTM A182, A276, A479 / ASME SA182, SA276, SA479
Size1/16” 1/2” & 1.5MM to 38.1MM
Pressure6000PSI for Stainless Steel 300/1000/3000PSI for Brass
TypesTube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories

Stainless Steel 316 Tube Fittings Equivalent Standard Grade

SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3

Stainless Steel 316 Tube Fittings Types

Stainless Steel 316 Compression Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni Fe
SS 316 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 11.00 – 14.00 67.845 min
ASTM A182 SS 316 Instrumentation Tube Fittings Mechanical Properties
GradeDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
SS 3168.0 g/cm31400 °C (2550 °F)Psi – 75000, MPa – 515Psi – 30000, MPa – 20535 %
Other Available Stock of Stainless Steel 316 Instrumentation Tube Fittings
  • SS 316 Swagelok instrumentation fittings
  • ASTM A182 316 Reducing Union Tee
  • DIN 1.4401 / 1.4436 45 Degree Positionable Male Elbow
  • ASTM A276 316 Ferrule Nut
  • SS 316 Positionable Male Run Tee
  • AISI 316 Hex Plug
  • ASTM A182 SS 316 Tube End Closure
  • ASME SA182 316 Stainless Steel Fitting End Closure
  • 316 Stainless Steel Parker Compression Fittings
  • A182 316 Bulkhead Reducing Union
  • 316 Hydraulic Fittings in India
  • SS 316 Single Ferrule Compression Fitting
  • Grade 316 Ferrule Fitting Supplier
  • Gr. 316 Positionable Male Elbow
  • SUS 316 Hex Nipple
  • Grade 316 Hex Bushing
  • SA479 316 Male Adapter
  • 316 Female Adapter
  • Stainless Steel 316 Allen Key Plug
  • SS 316 Instrumentation Pipe Fittings
  • UNS S31600 Tube Cap Fittings
  • SS 316 Tylok Instrumentation Fittings
  • 316 Stainless Steel Union Joint Ball
  • 316 SS Two Ferrule Compression Fitting
  • 316 Ferrule Tube Fittings
  • SS 316 High Pressure Hydraulic Tube Fittings
Suppliers and Exporters of Stainless Steel 316 Compression Tube Fittings in Countries Like
Israel, Netherlands, Italy, Peru, Ghana, Kuwait, Croatia, Estonia, Lithuania, Canada, Jordan, Libya, United Arab Emirates, Puerto Rico, Lebanon, Venezuela, Ireland, Bhutan, Russia, Morocco, Taiwan, Hong Kong, Switzerland, Turkey, Thailand, Saudi Arabia, Bolivia, Austria, Brazil, Slovakia, Malaysia, Mongolia, India, malaysia, srilanka, Mexico, Azerbaijan, thailand, Poland, Sri Lanka, Costa Rica, Greece, Nepal, Singapore, New Zealand, France, Ecuador, Spain, Sweden, Algeria, Ukraine, Qatar, Japan, Finland, Philippines, Kenya, Bangladesh, Serbia, Gabon, Iran, Kazakhstan, China, South Korea, Portugal, Hungary, Macau, Bulgaria, Germany, Egypt, Poland, Gambia, United States, Belgium, Argentina, Nigeria, Bahrain, mexico, Chile, Oman, Afghanistan, cyprus, Tibet, Colombia, Zimbabwe, Denmark, Belarus, Australia, South Africa, Yemen, Tunisia, Namibia, Czech Republic, Vietnam, Norway, Chile, Iran, United Kingdom, Indonesia, brazil, Romania, Trinidad & Tobago, Nigeria, Mexico.