SS 310 Manifold Valves, 310 Stainless Steel Instrument Manifolds, Stainless Steel 310 2 Way Manifold Valves, UNS S31000 Manifold Valves, DIN 1.4841 Manifold Valve Exporter, SS 310 3 - Way Manifold Valves, Stainless Steel 310 Manifold Valve Supplier in Mumbai, India.
Kalpataru Piping is a renowned supplier of SS 310 Manifold Valves, which is weldable by general resistance and fusion methods. Stainless Steel 310 Multi – Port Gauge Valves has excellent good welding properties, where post-weld annealing is not usually needed to re-establish its good performance in an extensive range of corrosive forms. Also, like most other austenitic material, these Stainless Steel 310 Single Block & Bleed Gauge Valves work hardens and may perhaps need annealing after stern forming. The important characteristic of Stainless Steel 310 Double Block & Bleed Gauge Valves is its confrontation to inter-granular corrosion. Stainless Steel 310 Two Valve (three-way) Manifold Valves as well has low menace of weld decay because of Titanium addition. Meanwhile, Stainless Steel 310 Two Valve Manifold Remote Mount Valves encloses an addition of Titanium of as a minimum five times the content of carbon.
Grade 310 SS T-Type 5 way Valve Stockist, Stainless Steel 310 5 Way Manifold Valve Dealer, SS 310 Block and Bleed Valve Distributor, SUS 310 H-Type 3 way Manifold, Stainless Steel 310 Direct-Mount Manifolds, SS 310 V / VB and VL series Manifolds, AISI 310 Remote-Mount, Stainless Steel 310 Manifold Valves Exporter in India.
Stainless Steel 310 Two Valve “T” Type Manifold for Pressure Instruments Valves is a nickel-chromium austenitic product that contains Titanium. Stainless Steel 310 Three Valve Manifold Remote Mount Valves are suggested for parts fabricated by welding that are cannot consequently be annealed. Meanwhile, Stainless Steel 310 Three Valve Manifold Bar Type Direct Mount Valves is stabilized austenitic steel, however, by means of an addition of titanium. This addition of titanium in Stainless Steel 310 Three Valve Manifold Direct Mount T Type Valves minimizes or stops carbide precipitation during welding and in the range of 800 Deg F to 1500 Deg F service.
Stainless Steel 310 Manifold Valve Specification
| Working Pressures | up to 6000 psig (413 bar) |
| Temperatures | up to 1200°F (648°C) with Grafoil valve packing |
Stainless Steel 310 Manifold Valves Equivalent Standard Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
Stainless Steel 310 Manifold Valves Types
Stainless Steel 310 2 Valve Manifold
Stainless Steel 310 3 Valve Manifold
Stainless Steel 310 5 Valve Manifold
(Pipe x Pipe)
(Pipe x Pipe)
(Pipe x Flange)
(Flange x Flange)
(Pipe x Flange)
Stainless Steel 310 Manifold Valves Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 310 | 0.015 max | 2.0 max | 0.15 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
Grade 310 Stainless Steel Manifold Valves Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Other Available Stock of SS 310 Manifold Valves
- Stainless Steel 310 Straight Type 3 Way
- Grade 310 Stainless Steel T-Type 3 way
- SS 310 2 Way Manifold Valve, R Type, Block and Bleed
- UNS S31000 2 Way Manifold Valves, R Type, Remote Mounting
- DIN 1.4841 2 Way Manifold Valves, T Type, Direct Mounting,
- 310 SS 2 Way Manifold Valves, H Type, Direct Mounting
- Stainless Steel 310 3 Way Manifold Valves, R Type, Remote Mounting
- 310 SS 3 Way Manifold Valves, Coplanar, Direct Mounting
- Stainless Steel 310 3 Way Manifold Valves, H Type, Direct Mounting
- Stainless steel 310 MANIFOLD-R-2 Way-01
- 310 Stainless Steel MANIFOLD-R-2 Way-02
- SS 310 MANIFOLD-R-2 Way-03
- Stainless Steel 310 T-TYPE MANIFOLD
- Stainless Steel 310 H-TYPE MANIFOLD
- SS 310 3 Way Manifold Valves, T Type, Direct Mounting
- Stainless Steel 310 5 Way Manifold Valves, R Type, Remote Mounting
- SS 310 5 Way Manifold Valves, Coplanar, Direct Mounting
- 310 Stainless Steel 5 Way Manifold Valves, T Type, Direct Mounting
- SS 310 5 Way Manifold Valves, H Type, Direct Mounting
- Steel 310 MANIFOLD-R-2 Way-04
- 310 Stainless Steel MANIFOLD-R-2 Way-05
- Stainless Steel 310 MANIFOLD-R-2 Way-06
- Stainless Steel 310 MANIFOLD-T-2 WAY
Suppliers and Exporters of Stainless Steel 310 Manifold Valves in Countries Like
Qatar, China, Bolivia, Puerto Rico, Nigeria, Zimbabwe, Chile, Mexico, Gambia, Portugal, Chile, Poland, Iran, Azerbaijan, Hong Kong, Croatia, Gabon, United Arab Emirates, South Korea, Australia, thailand, Algeria, Lithuania, Czech Republic, Indonesia, Ireland, Macau, Slovakia, Sweden, Austria, Costa Rica, cyprus, Bulgaria, Ukraine, Trinidad & Tobago, Finland, Netherlands, Ghana, Denmark, Ecuador, Kazakhstan, New Zealand, Hungary, Argentina, Taiwan, Germany, Mongolia, Singapore, Peru, Nepal, Afghanistan, Yemen, Serbia, Japan, Philippines, United Kingdom, Lebanon, Mexico, India, Canada, United States, Venezuela, Colombia, Tunisia, mexico, France, Poland, Bhutan, Italy, Kenya, Thailand, Iran, Egypt, Switzerland, Estonia, Nigeria, Bangladesh, Bahrain, Morocco, Tibet, Sri Lanka, Russia, Libya, Kuwait, Greece, Israel, Vietnam, Norway, Romania, brazil, Belgium, South Africa, Brazil, Turkey, Jordan, Saudi Arabia, Spain, Malaysia, Namibia, malaysia, Belarus, srilanka, Oman.