ASTM A182 SS 321 Tube Fittings, UNS S32100 45 Degree Male Elbow, SS 321 Union Tee Supplier in Mumbai, India.
Kalpataru Piping is a known stockist of SS 321 Instrumentation Tube Fittings, which is a flat annulus or ring, often of metal, used to spread the load of a screwed fastening. Stainless Steel 321 Front Ferrule Fittings with a non-tapered shank are designed to mate with a nut or to be driven into a tapped hole. Stainless Steel 321 Back Ferrule Fittings is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Stainless Steel 321 Tube End Closure Fittings, spread a load, and prevent damage to the surface being fixed, or provide some sort of insulation such as electrical. Additionally, Stainless Steel 321 Fitting End Closure Fittings may be used when the hole is a larger diameter than the fixing nut.
ASME SA182 Stainless Steel 321 Male Run Tee, Grade 321 SS Double Ferrule Tube Fittings Exporter in India.
The most universal shape is hexagonal, for alike reasons as Stainless Steel 321 Reducing Union Fittings offer an excellent granularity of angles for an apparatus to approach from (good in tight spots), but more (and smaller) corners would be exposed to being rounded off. Other particular shapes of Stainless Steel 321 Bulkhead Union Fittings exist for certain requirements, such as captive nuts for unreachable areas and wing nuts for finger modification. A wide variety of Stainless Steel 321 Union Elbow Fittings exists, from household hardware versions to specialized industry-specific designs that are engineered to meet different technical standards.
Stainless Steel 321 Instrumentation Fittings Specification
| Specifications | ASTM A182, A276, A479 / ASME SA182, SA276, SA479 |
| Size | 1/16” 1/2” & 1.5MM to 38.1MM |
| Thread | NPT, PT, BST, NPS, PS, BSP |
| Pressure | 6000PSI for Stainless Steel 300/1000/3000PSI for Brass |
| Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Stainless Steel 321 Tube Fittings Equivalent Standard Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Stainless Steel 321 Tube Fittings Types
Stainless Steel 321 Compression Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 5(C+N) – 0.70 max |
ASTM A182 SS 321 Instrumentation Tube Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Other Available Stock of Stainless Steel 321 Instrumentation Tube Fittings
- SS 321 Swagelok instrumentation fittings
- ASTM A182 321 Stainless Steel Reducing Union Tee
- DIN 1.4541 45 Degree Positionable Male Elbow
- ASTM A276 Stainless Steel 321 Ferrule Nut
- SS 321 Positionable Male Run Tee
- Stainless Steel AISI 321 Hex Plug
- ASTM A182 SS 321 Tube End Closure
- ASME SA182 321 Stainless Steel Fitting End Closure
- 321 Stainless Steel Parker Compression Fittings
- Stainless Steel A182 321 Bulkhead Reducing Union
- Stainless Steel 321 Hydraulic Fittings in India
- SS 321 Single Ferrule Compression Fitting
- Stainless Steel 321 Ferrule Fitting Supplier
- Stainless Steel 321 Positionable Male Elbow
- Stainless Steel SUS 321 Hex Nipple
- Stainless Steel 321 Hex Bushing
- SA479 Stainless Steel 321 Male Adapter
- Stainless Steel 321 Female Adapter
- Stainless Steel 321 Allen Key Plug
- SS 321 Instrumentation Pipe Fittings
- SS UNS S32100 Tube Cap Fittings
- SS 321 Tylok Instrumentation Fittings
- 321 Stainless Steel Union Joint Ball
- 321 SS Two Ferrule Compression Fitting
- Stainless Steel 321 Ferrule Tube Fittings
- SS 321 High Pressure Hydraulic Tube Fittings