Inconel 625 Tube Fittings manufacturer & Supplier in India
Inconel 625 tube fittings are manufactured and engineered with a high degree of accuracy out of nickel-based alloy, which has a superior tensile strength and remarkable corrosion, oxidation, and high temperature resistance. These fittings have proven and dependable applications in the most challenging environments and are best suited for applications in chemical processing, aerospace, and generation of power. Inconel 625 tube fittings have an excellent fatigue strength with an excellent stress-corrosion resistance that allows long-term performance and reliability where superior strength and reliability are highly demanded.
Inconel Alloy 625 Male Connector, Ready Stock Of Inconel 625 Bulkhead Union, Nickel Alloy 625 Twin Ferrule Fittings Supplier in Mumbai, Manufacturer of ASTM B366 Inconel Alloy 625 Hydraulic Tube Fittings, Inconel 625 Female Elbow.
Experience the high quality and durability of Inconel 625 fittings from Kalpataru Piping Solution that are developed to sustain the high demands of industrial use. In addition to our fine Inconel 600 tube fittings, we have multi-purpose alloy 625 fittings for fine flow regulation and durable Inconel 625 tube fittings with a long life cycle and corrosion resistance. Designed to work together and supported by high standards of quality, our products enable the buyer to have the confidence to go to the most challenging of environments. Enhance our product line and get the performance that suits you with unparalleled performance.
Inconel 625 Back Ferrule, Alloy 625 Single & Double Ferrule Tube Fittings, Incoloy 625 Female Connector Manufacturer in Mumbai, India, Inconel 625 Compression Tube Fittings, DIN 2.4856 Ferrule Fittings, Inconel Alloy 625 Tube To Union, UNS N06625 Tube Fittings, Alloy 625 Reducing Union, Inconel 625 Union Elbow.
The offered Inconel 625 Female Connector Fittings are extensively used to shield ends of the pipe along with keeping out the dirt and other foreign material. The main function of using these Inconel 625 Female Run Tee Fittings is to have a water-resistant connection. Inconel 625 Female Branch Tee Fittings are as well being attached on the water pump lines with the solitary function of getting away by means of air blocks. Inconel 625 Ferrule Nut Fittings is one of the most commonly used for industrial pipe fitting that assists to connect two pipes or tubes of dissimilar diameters.
Table of Contents
- Inconel 625 Tube Fittings Specification
- Inconel 625 Tube Fittings Types
- Size Chart of Inconel 2.4856 Hydraulic Fittings
- Alloy 625 Compression Fittings Sizes
- Inconel 625 Tube Fitting Sizes
- Inconel Metal Blanking Plug Metric Sizes
- Inconel Metal Allen Key Threads Dimensions
- Threads Sizes of Inconel Metal Male Elbow
- Threads Dimensions of Inconel Female Connector
- Thread of Inconel Blanking End
- Pressure Ratings of Inconel Alloy Double Ferrule Fittings
- Maximum Allowable Working Pressure of Inconel Material Plug
- Inconel Alloy Union Ball Joint Temperature Range
- Chemical Composition of Inconel 625 Tube Fittings
- Mechanical Properties of Inconel 625 Tube Fittings
- Physical Properties of UNS N06625 Adapter Fittings
- Equivalent Material of Inconel 625 Tube Fittings
- Configuration of Inconel Tube Fittings
- Shapes of Inconel Back Ferrule
- Inconel Male Bulkhead Connector Installation
- Application of Inconel 625 Male Elbow
- Inconel 625 Tube Fittings HS Code
- FAQ’s About Inconel 625 Tube Fittings
Inconel 625 Tube Fittings Specification
The specifications of Inconel 625 tube fittings define their chemical composition, dimensional tolerances, and mechanical properties to guarantee quality and reliability.
| Specifications | ASTM B366 / ASME SB 366 |
| Size | 1/16” 1/2” & 1.5MM to 38.1MM |
| Thread | NPT, PT, BST, NPS, PS, BSP |
| Pressure | 6000PSI for Stainless Steel 300/1000/3000PSI for Brass |
| Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Origins of Inconel 625 Tube Fittings
Inconel 625 originated as a nickel-chromium-molybdenum alloy engineered for high strength and corrosion resistance in extreme environments. Its origin lies in:
Indian
European
Japanese
Inconel 625 Tube Fittings Types
Size Chart of Inconel 2.4856 Hydraulic Fittings
The size chart of Inconel 2.4856 hydraulic fittings provides precise measurements to ensure compatibility and seamless integration.
| Size | O.D (inch) | O.D (mm) |
|---|---|---|
| -48 | 3.44 | 87,3 |
| -12 | 1.02 | 26,0 |
| -16 | 1.28 | 32,5 |
| -40 | 2.82 | 71,5 |
| -20 | 1.62 | 41,2 |
| -8 | 0.81 | 20,6 |
| -24 | 1.86 | 47,3 |
| -2 | 0.39 | 9,9 |
| -4 | 0.52 | 13,2 |
| -06 | 0.65 | 16,6 |
| -32 | 2.33 | 59,3 |
Alloy 625 Compression Fittings Sizes
Alloy 625 compression fittings come in a variety of sizes, catering to the requirements of high-pressure systems.
| Tube Fittings Types | Size OD | Size Inch |
|---|---|---|
| Tube To Union | 6mm to 38mm | 1/4″ to 1 1/2″ |
| Tube to Male Fittings | ||
| Tube to Female Fittings | ||
| Tube to Pipe Fittings | ||
| Tube Fittings Accessories |
Inconel 625 Tube Fitting Sizes
Inconel 625 tube fittings are available in multiple standard sizes, facilitating versatile application across industries.
Inconel 625 Seamless Compression Fittings
- ☑ Size: 1/8″ to 2″
- ☑ Pressure Rating: 3000psi – 10000psi
- ☑ Threads: NPT, BSPT, BSPP
Alloy 625 Welded Compression Fittings & Tube Adapters
- ☑ Size: 24″ to 96″ or custom
- ☑ Pressure Rating: 3000psi – 10000psi
- ☑ Threads: NPT, BSPT, BSPP
Inconel Metal Blanking Plug Metric Sizes
Metric-sized blanking plugs in Inconel metal are designed for secure sealing and blocking in fluid systems.
| Metric sizes (Inches) | Size (mm) |
|---|---|
| 3/8 | 12 mm |
| 5/16 | 10 mm |
| 3/16 | 6 mm |
| 1 | 25 mm |
| 3/4 | 20 mm |
Inconel Metal Allen Key Threads Dimensions
Allen key thread dimensions for Inconel metal fittings provide detailed specifications for precise installation.
| Thread I.D | Size & Pitch | |
|---|---|---|
| mm | inch | inch – TPI |
| 43,9 | 1.73 | 1.1/2 – 11.1/2 |
| 29,5 | 1.16 | 1 – 11.1/2 |
| 38,1 | 1.5 | 1.1/4 – 11.1/2 |
| 23,4 | 0.92 | 3/4 – 14 |
| 56,4 | 2.22 | 2 – 11.1/2 |
| 17,8 | 0.7 | 1/2 – 14 |
| 84,8 | 3.34 | 3 – 8 |
| 69,1 | 2.72 | 2.1/2 – 8 |
| 8,4 | 0.33 | 1/8 – 27 |
| 11,2 | 0.44 | 1/4 – 18 |
| 14,7 | 0.58 | 3/8 – 18 |
Threads Sizes of Inconel Metal Male Elbow
Thread sizes for Inconel metal male elbows are engineered for reliable and robust connections in piping systems.
| Dash | BSPT & BSPP |
|---|---|
| Size | Size & Pitch |
| – | inch – TPI |
| -8 | 1/2 – 14 |
| -12 | 3/4 – 14 |
| -10 | 5/8 – 14 |
| -2 | 1/8 – 28 |
| -24 | 1.1/2 – 11 |
| -4 | 1/4 – 19 |
| -20 | 1.1/4 – 11 |
| -40 | 2.1/2 – 11 |
| -32 | 2(11) |
| -48 | 3 – 11 |
| -6 | 3/8 – 19 |
| -16 | 1 – 11 |
Threads Dimensions of Inconel Female Connector
Inconel female connector thread dimensions are designed for compatibility with various related components.
| BSPP Male THREAD OD | BSPP Female THREAD ID | BSPT Female THREAD ID | BSPT Male THREAD OD | ||||
|---|---|---|---|---|---|---|---|
| inch | mm | inch | mm | inch | mm | inch | mm |
| 0.38 | 9,6 | 0.34 | 8,6 | 0.33 | 8,4 | 0.37 | 9,5 |
| 0.51 | 13,0 | 0.47 | 11,9 | 0.44 | 11,2 | 0.5 | 12,8 |
| 0.65 | 16,5 | 0.6 | 15,2 | 0.59 | 14,7 | 0.64 | 16,3 |
| 0.82 | 20,8 | 0.75 | 19,1 | 0.72 | 18,3 | 0.8 | 20,4 |
| 0.9 | 22,8 | 0.82 | 20,8 | 0.81 | 20,6 | 0.89 | 22,5 |
| 1.04 | 26,3 | 0.97 | 24,6 | 0.94 | 23,9 | 1.02 | 25,9 |
| 1.3 | 33,1 | 1.21 | 30,7 | 1.17 | 29,7 | 1.28 | 32,6 |
| 1.64 | 41,8 | 1.55 | 39,4 | 1.52 | 38,6 | 1.62 | 41,1 |
| 1.88 | 47,7 | 1.79 | 45,5 | 1.75 | 44,5 | 1.85 | 47,0 |
| 2.34 | 59,5 | 2.26 | 57,4 | 2.22 | 56,4 | 2.31 | 58,6 |
| 2.95 | 75,1 | 2.86 | 72,6 | 2.83 | 71,9 | 2.92 | 74,1 |
| 3.46 | 87,9 | 3.36 | 85,4 | 3.33 | 84,6 | 3.41 | 86,6 |
Thread of Inconel Blanking End
The thread specifications of Inconel blanking ends ensure secure sealing in blocked-off pipelines.
- ✅ Metric Fine
- ✅ SAE male thread with O-ring
- ✅ British Standard Pipe Parallel
- ✅ British Standard Pipe Tapered
- ✅ National Pipe Thread (NPT)
Inconel 625 Tube to Male Pipe Thread
Inconel 625 tube to male pipe threads are precision-cut for maximum sealing and pressure resistance.
- UNS N06625 Inconel 625 Tube to Male Elbow (45 Degree)
- Alloy 625 UNS N06625 Tube to Male Branch Tee
- Inconel Alloy 625 Tube to Male Connector
- Inconel 625 UNS N06625 Tube to Bulkhead Male Connector
- Alloy 625 Tube to Male Run Tee
Alloy 625 Tube to Female Pipe Thread
Alloy 625 tube to female pipe threads provide adaptable connection options for various piping configurations.
- ASME SB564 UNS N06625 Tube to Bulkhead Female Connector
- Inconel Alloy 625 Tube to Female Elbow
- Inconel 625 Tube to Female Connector
- ASTM B564 UNS N06625 Tube to Female Branch Tee
- Inconel 625 Din 2.4856 Tube to Female Run Tee
ASME SB564 UNS N06625 Tube Ends
Tube ends manufactured to ASME SB564 UNS N06625 standards ensure quality and durability in high-performance systems.
- Inconel 625 Grade Cap for Tube End
- Alloy 625 Tube Cap
- ASTM B446 UNS N06625 Plug
- Inconel 625 Din 2.4856 Caps and Plugs
- ASME SB564 UNS N06625 NPT Thread Cap
Pressure Ratings of Inconel Alloy Double Ferrule Fittings
Inconel alloy double ferrule fittings are rated for extreme pressure applications, confirming their suitability for critical service.
| At max temp (482°C) | End Connection Size (mm) | Up to 100°F | At max temp (537°C) |
|---|---|---|---|
| 381 bar | 6 | 670 bar | 234 bar |
| 216 bar | 10 | 380 bar | 133 bar |
| 3705 psi | 3/8 | 6500 psi | 2275 psi |
| 2907 psi | 1/2 | 5100 psi | 1785 psi |
| 176 bar | 12 | 310 bar | 108 bar |
| 5814 psi | 1/4 | 10 200 psi | 3570 psi |
Maximum Allowable Working Pressure of Inconel Material Plug
The maximum allowable working pressure of Inconel material plugs guides safe and efficient system design.
| Max Allowable Working Pressure | End Connection Size (Inch) | ||
|---|---|---|---|
| Wall Thickness, inch | Up to 100°F | Max temp 1000°F | – |
| 0.065″ | 9 400 | 6 862 | 3/8 |
| 0.049″ | 10 700 | 7 811 | 1/4 |
| 0.065″ | 6 800 | 4 964 | 1/2 |
Inconel Alloy Union Ball Joint Temperature Range
The temperature range of Inconel alloy union ball joints ensures reliable operation across a wide thermal spectrum.
| Size (mm) | Up to 100°F | ||
|---|---|---|---|
| 12 mm | 480 bar | 474 bar | 350 bar |
| 6 mm | 660 bar | 651 bar | 482 bar |
| 10 mm | 480 bar | 474 bar | 350 bar |
Chemical Composition of Inconel 625 Tube Fittings
The chemical makeup of Inconel 625 tube fittings includes key alloying elements that impart corrosion resistance and strength.
| ALLOY | C | MN | SI | S | AL | TI | FE | NI | CR |
|---|---|---|---|---|---|---|---|---|---|
| INCONEL 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | 0.40 max | 0.40 max | 5.0 max | 58.0 min | 20.0 – 23.0 |
Mechanical Properties of Inconel 625 Tube Fittings
Understanding the mechanical performance metrics of Inconel 625 tube fittings is vital for selecting the right product for high-stress applications.
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.4 g/cm³ | 1350 ºC (2460 ºF) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Physical Properties of UNS N06625 Adapter Fittings
Physical properties of UNS N06625 adapter fittings include density, melting point, and thermal expansion, critical for application fit.
| Properties | Values |
|---|---|
| Permeability | at 200 Oersted (15.9 kA/m) — 1.0006 |
| Curie Temperature | °F — <-320 |
| °C — -196 | |
| Density | lb/cu in — 0.305 |
| gram/cc — 8.44 | |
| Melting Range | °F — 2350 |
| °C — 1290 |
Equivalent Material of Inconel 625 Tube Fittings
Equivalent materials to Inconel 625 tube fittings provide insight into interchangeability and global standard compliance.
| ALLOY | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
|---|---|---|---|---|---|---|---|---|
| INCONEL 625 | N06625 | 2.4856 | NC22DNB4M | NiCr22Mo9Nb | NCF 625 | NA 21 | ХН75МБТЮ | ЭИ602 |
Configuration of Inconel Tube Fittings
Configurations of Inconel tube fittings accommodate multiple piping arrangements, optimizing flow and connection integrity.
Back ferrule
➝
Inconel body
➝
Inconel nut
➝
Front ferrule
Shapes of Inconel Back Ferrule
| Straight | Plug |
| Elbow | Cap |
| Cross | Nut |
| Tee |
Inconel Male Bulkhead Connector Installation
The installation procedures for Inconel male bulkhead connectors ensure secure, leak-proof joints.
| Installation | Type |
|---|---|
| Round head Threaded | High temp alloy female run tee |
| Double Ferrule 3000-6000 Psig pressure UNF NPT BSPT | Inconel metal branch reducing tee |
| Single Ferrule Sleeve Type Metric thread | Inconel cross |
| Male To Female Round head Threaded | High temp alloy street elbow |
| Single Ferrule Sleeve Type Metric thread | Inconel alloy bulkhead union elbow |
| Double Ferrule 3000-6000 Psig pressure UNF NPT BSPT | Inconel bulkhead union |
| Round head Threaded | Inconel alloy female thread elbow |
Inconel 625 Tube to Tube Connector
Tube-to-tube connectors in Inconel 625 offer flexible and reliable pipeline joining solutions.
- Alloy 625 UNS N06625 Tube to Tube Bulkhead Union
- ASME SB564 UNS N06625 Tube to Tube Union
- Inconel 625 Tube to Tube Reducer Union
- Inconel 625 Din 2.4856 Tube to Tube Bulkhead Reducer Union
- UNS N06625 Inconel 625 Tube to Tube Bulkhead Union Elbow
Inconel 625 Weld Fittings
Inconel 625 weld fittings are crafted for high-strength, permanent joints in critical piping systems.
- Alloy 625 UNS N06625 Male Pipe Weld Connector
- ASME SB564 UNS N06625 Tube Socket Weld Union
- Inconel 625 Tube Socket Weld Elbow
- Inconel 625 Din 2.4856 Male Pipe Weld Elbow
ASTM B564 UNS N06625 Special Fittings
Special fittings meeting ASTM B564 UNS N06625 standards offer tailored solutions for complex piping requirements.
- Alloy 625 UNS N06625 Integral Flange Connector
- ASME SB564 UNS N06625 Sanitary Flange
- Inconel 625 Lap Joint Flange Connector
- Inconel 625 Din 2.4856 Vent Protector
Inconel 625 DIN 2.4856 Hose Fittings
DIN 2.4856 hose fittings in Inconel 625 ensure compatibility with international hose standards.
- Alloy 625 UNS N06625 Hose Port Connector – Serrated
- ASME SB564 UNS N06625 Hose Male Adapter
- Inconel 625 Hose Tube Adapter Swaged
- Inconel 625 Din 2.4856 Barbed Male Adapter
- UNS N06625 Inconel 625 Hose Connector Sleeve
UNS N06625 Inconel 625 Tube Fitting Accessories
Accessory fittings for UNS N06625 Inconel 625 tubes expand system functionality and customization options.
- Alloy 625 UNS N06625 Nut
- ASME SB564 UNS N06625 Front Ferrule
- Inconel 625 Back Ferrule
- Inconel 625 Din 2.4856 Fitting Gasket
- UNS N06625 Inconel 625 O-Seal Connector Lock Nut
Inconel Tube Fittings Cap Markings
Cap markings on Inconel tube fittings provide essential information for identification and quality assurance.
| Marking | Material |
|---|---|
| Grade on face | Inconel |
| Grade on outer rim | |
| Grade on outer rim | |
| Grade on neck |
Application of Inconel 625 Male Elbow
Inconel metal male elbows are used where lines face high pressure, high temperature, and aggressive media, keeping flow reliable in critical service.
- Petrochemical
- Semiconductor industries
- Natural gas drilling
- Alternative fuels
- Subsea exploration
Check Our Related Products
Inconel 625 Tube Fittings HS Code
HS codes assigned to Inconel 625 tube fittings facilitate international trade and regulatory compliance.
| Properties | Values |
|---|---|
| HS code | 73071900 |
Other Available Stock of Inconel Alloy 625 Instrumentation Tube Fittings
- Inconel 625 Swagelok instrumentation Fittings
- ASTM B564 Alloy 625 Nickel Reducing Union Tee
- DIN 2.4856 45 Degree Positionable Male Elbow
- ASTM B366 Inconel® Alloy 625 Ferrule Nut
- Inconel 625 Positionable Male Run Tee
- Inconel Alloy JIS NCF 625 Hex Plug
- ASME SB366 Inconel 625 Tube End Closure
- Inconel 625 Fitting End Closure
- Inconel 625 Parker Compression Fittings
- Inconel 625 Bulkhead Reducing Union
- Inconel 625 Hydraulic Fittings in India
- Inconel 625 Single Ferrule Compression Fitting
- Inconel Alloy 625 Ferrule Fitting Manufacturer
- Alloy 625 Tube to Female Pipe Thread
- Inconel 625 Tube to Male Pipe Thread
- Inconel 625 Positionable Male Elbow
- Inconel 625 Hex Nipple Supplier
- Inconel® 625 Hex Bushing Exporter
- SB564 Inconel 625 Male Adapter
- Inconel 625 Female Adapter
- Inconel 625 Allen Key Plug
- Inconel 625 Instrumentation Pipe Fittings
- Inconel UNS N06625 Tube Cap Fittings
- Inconel 625 Tylok Instrumentation Fittings
- Inconel Alloy 625 Union Joint Ball
- Inconel 625 Two Ferrule Compression Fitting
- Inconel 625 Ferrule Tube Fittings Suppliers
- Inconel 625 High Pressure Hydraulic Tube Fittings
- Inconel 625 Tube Fitting sizes
- UNS N06625 Tube to Male Branch Tee
Suppliers and Exporters of Inconel 625 Compression Tube Fittings in Countries Like
Malaysia, Costa Rica, Tunisia, United Kingdom, Japan, Bhutan, Ecuador, Switzerland, Turkey, Namibia, South Africa, Thailand, Ukraine, Belgium, Chile, Mexico, Kazakhstan, Mexico, Austria, Saudi Arabia, United Arab Emirates, Netherlands, India, Bolivia, Sri Lanka, Denmark, Poland, Bangladesh, mexico, Poland, South Korea, Afghanistan, Azerbaijan, Venezuela, brazil, Macau, Portugal, cyprus, Kenya, United States, China, Puerto Rico, Lithuania, Indonesia, Croatia, Philippines, Iran, Bulgaria, Peru, Nigeria, Gabon, malaysia, Finland, Egypt, Argentina, Taiwan, thailand, Hong Kong, Slovakia, Qatar, Estonia, Lebanon, Brazil, Oman, Ghana, Algeria, Yemen, Morocco, Italy, Bahrain, Belarus, Hungary, Tibet, Jordan, Australia, Israel, France, Nepal, Kuwait, Spain, Vietnam, Singapore, Germany, Libya, Canada, New Zealand, Chile, Romania, Sweden, Trinidad & Tobago, srilanka, Norway, Russia, Czech Republic, Zimbabwe, Serbia, Mongolia, Colombia, Ireland, Nigeria, Iran, Greece, Gambia.
FAQ’s About Inconel 625 tube fittings
What pressure ratings do Inconel 625 tube fittings support?
Pressure ratings vary based on size and design, but these fittings are commonly used in high-pressure systems due to their exceptional strength and leak-proof performance.
What industries use Inconel 625 tube fittings the most?
They are widely used in petrochemical plants, desalination units, aerospace components, nuclear facilities, and chemical processing systems.
Are custom sizes available for Inconel 625 tube fittings?
Yes, these fittings can be customized in size, thread type, thickness, and configuration based on project requirements.
Do Inconel 625 tube fittings resist chloride-induced corrosion?
Absolutely. Inconel 625 is highly resistant to pitting, crevice corrosion, and stress corrosion cracking in chloride-rich environments.